Gothic (Mono)

Free Shipping On Order Of $100.00 or More   
Applies to lower 48 states only 

      
 

                                                                    

This 16 ft. wide Mono Gothic hoop design is made using two 15' lengths of 1 3/8" Top Rail fence tubing, bent on our C-24 hoop bender. For ease of fabrication the 15 ft lengths are made up of one 10'6" and one 4'6" lengths.  

We have listed the connector in sets or individually. The sets contain the required connectors to build one (1) hoop with clamps for side purlins included

OR

If you prefer to purchase the individual connectors you will need 1 peak connector and one 2 pack of angle brace connectors for each hoop you intend to build. If side purlins are desired then add 2 purlin clamps.

Hoops are typically placed 4 ft. on center or closer if desired. So to calculate the number of hoops you need just divide the greenhouse length you want by 4 then add 1. This Gothic design uses the welded peak connector.    POLY COVERING....This design requires 32 ft wide poly for main cover: To figure the correct size, measure the length of your greenhouse and add at least 2 feet. Example your Mono Gothic greenhouse is 16x24, then you need 32' X 26' poly for main roof ( the 26' running the length and the 32' up and over the house. The two ends can be covered by one 24' X 20. poly split in half.

 

Use the C-24 hoop bender to bend the hoops.The optional vertical leg set is not required but recommended if more than one greenhouse is being considered, otherwise the bender can be mounted flat on a work table or any stable flat or vertical surface 

 If you have any questions before you checkout give me a call 903-497-1158  or email herbs@lostcreek.net