|
|
1/2" emt Connectors
FREE Low Tunnel Hoop Bender
Free Shipping On Orders Of $100.00
Free Shipping Limited To Lower 48 States
Get one (1) FREE Model MH/LT Series Low Tunnel Bender-Series Hoop Bender of your choice
Or any of our 1/2" Connectors or 3/4" Connectors
Offer good only if you enter your choice of one MH/LT-Series in the
"Customer Comments" section during checkout or request it if placing
order by phone. Offer is not valid after order is placed. Sorry No Exceptions.
Offer Expires Jan. 15, 2019
1/2" splicer/ Coupling for connecting 1/2" emt tubing together
|
For Low Tunnel hoops made from 1/2" emt tubing. Use these connectors anywhere you need to connect 1/2" emt straight tubing perlins length wise to your 1/2" emt hoops.(screws included). (screws included).
|
For Low Tunnel hoops made from 1/2" emt tubing. Slide hoop through one opening then the straight base rail through the other opening and secure both with self drilling tech screws (screws included). Also see our 1/2" emt hoop to 1/2" emt perlin connector
|
3 way corner for 1/2" emt hoop to base connections, used on all portable low tunnel construction using 1/2" emt.
|
Plastic Snap Clamps for 1/2"emt tubing are used to attach Agribon or Poly covering to 1/2" emt metal tubing hoops. Clamps may be white or green depending on our on and stock.
|
Plastic Cross Snap Clamps for 1/2"emt tubing are used to connect low tunnel hoops to the straight perlin at the top, holding the hoops in a perfect upright position. Quick, simple and affordable.
|
100 Pack-Plastic Snap Clamps for 1/2"emt tubing are used to attach Agribon or Poly covering to 1/2" emt metal tubing hoops. Clamps may be white or green depending on our on and stock.
|
Bulk 50 pack, Plastic Cross Snap Clamps for 1/2"emt tubing are used to connect low tunnel hoops to the straight perlin at the top, holding the hoops in a perfect upright position. Quick, simple and affordable.
|
1 Package of 100--- #10 X 3/4' Hex Head self drilling tech screws.
|
|
|
|